|
|
|
| |
HOME
> 제품소개 > 응용제품군 > 토목구조/측량 > Selction
& Profiles |
|
| |
 |
|
|
| |
| This collection of
routines dedicated for structural engineering and drafting
and includes |
Design Section Tools
|
Drafting on Sections or Profiles
With Design Section Tools you can draw, offset and label
lines using different horizontal and vertical scales.
The perfect solution for working on cross sections, typical
sections and profiles.
You may draw by entering the slope (3:1), ft./ft. (0.2),
%grade (0.5), or Station and Elevation. Create a profile
coordinate system and draw ground lines and sewer lines.
Pick points on plan view for stationing (or type in station)
and enter the elevation. Place and label a manhole by
station and elevation, construct an offset using the vertical
scale, all with Design Section Tools.
Labeling
Select a line or polyline and Design Section Tools will
label the slope (3:1), ft./ft. (0.0156'/ft), or %grade
(0.05%). Pick a point and label a Station and Elevation,
or just an Elevation. Place a manhole and Design Section
Tools will label the station, rim elevation, and up to
three invert elevations.
|
|
| Sewer Profiles
|
Place structures on plan drawing
With Sewer Profiles you can place inlets, inlet manholes
and manholes on your plan drawing by station and offset,
using user definable blocks. Sewer Profiles then places
a data block allowing you to enter important information
about the structure (such as rim and invert elevations).
Data blocks may be placed on any structure whether existing
or proposed.
|
|
Automatic Profiles
Sewer Profiles are drawn automatically on your profile
drawing. Just select the structures that you want to use
to create a profile and Sewer Profiles does the rest.
A sewer profile with structures annotated, inverts labeled,
and pipe lengths and grades calculated and labeled automatically.
Automatic Plan Notes
Plan notes may also be created from selected structures.
A note containing the structure call out, station &
offset, rim elevation (or E.P. elevation for inlets),
and invert of structure is written automatically and placed
where you choose. Design Section Tools and Sewer Profiles
are available for CADian®. |
|
This sewer profile was generated automatically by selecting
the desired structures in the plan
|
|
These plan notes were generated automatically by selecting
the desired structures
|
|
This sewer profile was generated and annotated automatically
by selecting the desired structures in the plan
|
 |
|
| |
|
